/**
*  Copyright 2015 SmartThings
*
*  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
*  in compliance with the License. You may obtain a copy of the License at:
*
*      http://www.apache.org/licenses/LICENSE-2.0
*
*  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
*  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
*  for the specific language governing permissions and limitations under the License.
*
*/
metadata {
                definition (name: "Aeon Multisensor Gen5 Battery Settings - fixed settings", namespace: "Aeotec", author: "Chris Cheng") {
                                capability "Motion Sensor"
                                capability "Temperature Measurement"
                                capability "Relative Humidity Measurement"
                                capability "Illuminance Measurement"
                                capability "Sensor"
                                capability "Battery"
                                capability "Configuration"
                                
                                command "configureAfterSecure"
 
                                fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
                }
 
                simulator {
                                status "no motion" : "command: 9881, payload: 00300300"
                                status "motion"    : "command: 9881, payload: 003003FF"
 
                                for (int i = 0; i <= 100; i += 20) {
                                                status "temperature ${i}F": new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
                                                                new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
                                                                                scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1)
                                                                ).incomingMessage()
                                }
 
                                for (int i = 0; i <= 100; i += 20) {
                                                status "humidity ${i}%":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
                                                                new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(scaledSensorValue: i, sensorType: 5)
                                                ).incomingMessage()
                                }
 
                                for (int i in [0, 20, 89, 100, 200, 500, 1000]) {
                                                status "illuminance ${i} lux":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
                                                                new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(scaledSensorValue: i, sensorType: 3)
                                                ).incomingMessage()
                                }
 
                                for (int i in [0, 5, 10, 15, 50, 99, 100]) {
                                                status "battery ${i}%":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
                                                                new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i)
                                                ).incomingMessage()
                                }
                                status "low battery alert":  new physicalgraph.zwave.Zwave().securityV1.securityMessageEncapsulation().encapsulate(
                                                new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: 255)
                                ).incomingMessage()
 
                                status "wake up" : "command: 8407, payload: "
                }
 
                tiles(scale: 2) {
                                multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
                                                tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
                                                                attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
                                                                attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
                                                }
                                }
                                valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
                                                state "temperature", label:'${currentValue}°',
                                                backgroundColors:[
                                                                [value: 32, color: "#153591"],
                                                                [value: 44, color: "#1e9cbb"],
                                                                [value: 59, color: "#90d2a7"],
                                                                [value: 74, color: "#44b621"],
                                                                [value: 84, color: "#f1d801"],
                                                                [value: 92, color: "#d04e00"],
                                                                [value: 98, color: "#bc2323"]
                                                ]
                                }
                                valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
                                                state "humidity", label:'${currentValue}% humidity', unit:""
                                }
                                valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
                                                state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
                                }
                                valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
                                                state "battery", label:'${currentValue}% battery', unit:""
                                }
                                standardTile("configureAfterSecure", "configureAfterSecure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
                                                state "configureAfterSecure", label:"", action:"configureAfterSecure", icon:"st.secondary.configure"
                                }
 
                                main(["motion", "temperature", "humidity", "illuminance"])
                                details(["motion", "temperature", "humidity", "illuminance", "battery", "configureAfterSecure"])
                }
}
 
def parse(String description)
{
                def result = null
                if (description == "updated") {
                                result = null
                } else {
                                def cmd = zwave.parse(description, [0x31: 5, 0x30: 2, 0x84: 1])
                                if (cmd) {
                                                result = zwaveEvent(cmd)
                                }
                }
                log.debug "Parsed '${description}' to ${result.inspect()}"
                return result
}
 
def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
{
                def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
 
                if (!isConfigured()) {
                                // we're still in the process of configuring a newly joined device
                                log.debug("not sending wakeUpNoMoreInformation yet")
        result += response(configureAfterSecure())
                } else {
                                result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
                }
                result
}
 
def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
                def encapsulatedCommand = cmd.encapsulatedCommand([0x31: 5, 0x30: 2, 0x84: 1])
                // log.debug "encapsulated: ${encapsulatedCommand}"
                if (encapsulatedCommand) {
                                zwaveEvent(encapsulatedCommand)
                } else {
                                log.warn "Unable to extract encapsulated cmd from $cmd"
                                createEvent(descriptionText: cmd.toString())
                }
}
 
def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
    // log.debug "Received SecurityCommandsSupportedReport"
                response(configureAfterSecure())
}
 
def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
                def map = [ name: "battery", unit: "%" ]
                if (cmd.batteryLevel == 0xFF) {
                                map.value = 1
                                map.descriptionText = "${device.displayName} battery is low"
                                map.isStateChange = true
                } else {
                                map.value = cmd.batteryLevel
                }
                state.lastbatt = new Date().time
                createEvent(map)
}
 
def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
{
                def map = [:]
                switch (cmd.sensorType) {
                                case 1:
                                                map.name = "temperature"
                                                def cmdScale = cmd.scale == 1 ? "F" : "C"
                                                map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
                                                map.unit = getTemperatureScale()
                                                break;
                                case 3:
                                                map.name = "illuminance"
                                                map.value = cmd.scaledSensorValue.toInteger()
                                                map.unit = "lux"
                                                break;
                                case 5:
                                                map.name = "humidity"
                                                map.value = cmd.scaledSensorValue.toInteger()
                                                map.unit = "%"
                                                break;
                                default:
                                                map.descriptionText = cmd.toString()
                }
                createEvent(map)
}
 
def motionEvent(value) {
                def map = [name: "motion"]
                if (value) {
                                map.value = "active"
                                map.descriptionText = "$device.displayName detected motion"
                } else {
                                map.value = "inactive"
                                map.descriptionText = "$device.displayName motion has stopped"
                }
                createEvent(map)
}
 
def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
                motionEvent(cmd.sensorValue)
}
 
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
                motionEvent(cmd.value)
}
 
def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
                if (cmd.notificationType == 7 && cmd.event == 7) {
                                motionEvent(cmd.notificationStatus)
                } else {
                                createEvent(descriptionText: cmd.toString(), isStateChange: false)
                }
}
 
def zwaveEvent(physicalgraph.zwave.Command cmd) {
                createEvent(descriptionText: cmd.toString(), isStateChange: false)
}
 
def configureAfterSecure() {
    //log.debug "Commands sent"
 
    def cmds = []
    // send battery, temperature, humidity, and illuminance every 30 minutes
	cmds << zwave.configurationV1.configurationSet(scaledConfigurationValue: 225, parameterNumber: 101, size: 4)
	cmds << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 30*60)
	// send no-motion report 60 seconds after motion stops
	cmds << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 10)
    // send binary sensor report instead of basic set for motion
	cmds << zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2)							
	// Ensure that the Multisensor Gen5 PIR sensor is active
	cmds << zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: 1)
    // disable notification-style motion events
	cmds << zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0)
	cmds << zwave.batteryV1.batteryGet()
	cmds << zwave.sensorBinaryV2.sensorBinaryGet(sensorType:0x0C)
    //commands(cmds)
    setConfigured()
               
    secureSequence(cmds) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
}
 
private setConfigured() {
                device.updateDataValue("configured", "true")
}
 
private isConfigured() {
                device.getDataValue(["configured"]).toString() == "true"
}
 
private secure(physicalgraph.zwave.Command cmd) {
                zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
}
 
private secureSequence(commands, delay=200) {
                delayBetween(commands.collect{ secure(it) }, delay)
}