This page lists the technical specifications for Multisensor 6 and form part of the larger Multisensor 6 user guide.

 

Name: Multisensor 6

Model number: ZW100

Z-Wave Plus Certified: Yes


Power supply: 

USB DC 5V 

battery power (2×CR123A batteries, 3V, 1500mAh).

Not compatible to rechargeable CR123A batteries (3.7V)

Maximum power consumption during a report: 200mA

Repeater:

USB power - Yes

Min Voltage = 4.5VDC
Max Voltage = 5.5VDC

Battery Power - No

Min Voltage = 2.6VDC
Max voltage = 3.2VDC

Sensor Technical information:

Measured temperature range: 

-10°C to 50°C

14°F to 122°F. 

Temperature Accuracy:

±1°C

±1.8°F.

Measured humidity range: 20%RH to 90%RH. 

Humidity Accuracy: ±3%RH (at 25°C/77°F).

Lighting: 0 LUX to 30000 LUX.

UV Range: 0 to 10 UV index

Operating humidity: 8% to 80%.

Operating temperature: 

0°C to 40°C

32°F to 104°F.



Max motion sensitivity: 

5 metres. 

15 feet.

Water proofing: IP20 rating

Battery Life: ~1.5 years using 2x CR123A batteries


  • If the MS6 is triggered 20 times per a day, using 2 batteries, the MS6 will last 1.5 years on battery life
  • If the MS6 is triggered 200 times per a day using 2 batteries, the MS6 will last around 2-3 months.

Operating distance:

Up to 492 feet outdoors.

Up to 150 metres outdoors.


Supported Commands.


Non-SecureSecure
Node Info FrameCOMMAND_CLASS_ZWAVEPLUS_INFO V2,COMMAND_CLASS_VERSION V2,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_ASSOCIATION_GRP_INFO,
COMMAND_CLASS_ASSOCIATION V2,
COMMAND_CLASS_POWERLEVEL V1,
COMMAND_CLASS_NOTIFICATION_V3,
COMMAND_CLASS_WAKE_UP V2,
COMMAND_CLASS_BATTERY V1,
COMMAND_CLASS_SENSOR_BINARY V1,
COMMAND_CLASS_SENSOR_MULTILEVEL_V5,
COMMAND_CLASS_CONFIGURATION V1,
COMMAND_CLASS_SECURITY V1,
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2,
COMMAND_CLASS_DEVICE_RESET_LOCALLY,
COMMAND_CLASS_MARK V1,
COMMAND_CLASS_ZWAVEPLUS_INFO V2
COMMAND_CLASS_VERSION V2
COMMAND_CLASS_WAKE_UP V2
COMMAND_CLASS_MANUFACTURER_SPECIFICV2
COMMAND_CLASS_SECURITY V1
COMMAND_CLASS_DEVICE_RESET_LOCALLY V1
COMMAND_CLASS_MARK V1
Security Command Supported Report Frame
COMMAND_CLASS_ZWAVEPLUS_INFO,
COMMAND_CLASS_VERSION,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_WAKE_UP,
COMMAND_CLASS_ASSOCIATION_GRP_INFO,
COMMAND_CLASS_ASSOCIATION,
COMMAND_CLASS_POWERLEVEL,
COMMAND_CLASS_NOTIFICATION_V3,
COMMAND_CLASS_BATTERY V1,
COMMAND_CLASS_SENSOR_BINARY V1,
COMMAND_CLASS_SENSOR_MULTILEVEL_V5,
COMMAND_CLASS_CONFIGURATION,
COMMAND_CLASS_SECURITY,
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2


Notification/Alarm CC of MultiSensor 6:

Notification TypeNotification EventsDescription
Home Security0x07Previous Events cleared0x00Motion is cleared
Motion Detection Unknown Location0x08Motion is detected
Tampering Product covering removed0x03Vibration is triggered


Engineering Sheets:

Multisensor 6 (V1.08)
Multisensor 6 (V1.10 US/AU)
Multisensor 6 (V1.11 EU)


Specifications subject to change without notice due to continuing product improvement.