Name: Dual Nano Switch
Model number: ZW132 (with energy reading) / ZW140 (no energy reading)
Power input: 120 to 240VAC, 50/60Hz.
AES 128 Security: Yes
|AU||230V 50Hz, Max: 10A||921.42MHz|
|BR||220V 60Hz, Max: 10A||921.42MHz|
|CN||220V 50Hz, Max: 10A||868.42MHz|
|EU||230V 50Hz, Max: 10A||868.42MHz|
|IL||230V 50Hz, Max: 10A||868.42MHz|
|IN||230V 50Hz, Max: 10A||865.22MHz|
|UK||230V 50Hz, Max: 10A||868.42MHz|
|US||120V 60Hz, Max: 10A||908.42MHz|
All versions are compatible to these voltage levels:
110/120VAC 50/60Hz with Max: 10A (1 phase only)
or 220-240VAC 50/60Hz with Max: 10A (1 phase only)
Motor load max current: 2.5A Max per output.
Max load current: 5A max per output.
Max standby power: <0.8W.
Energy Measurement Input Voltage Required (ZW132 only): 90 - 240VAC required to power and allow energy reading.
Power measurement accuracy (ZW132 only): + or - 3W.
Surge Protection: 1kV voltage spike for 8-20us
Dimensions: 44.5 x 41 x 20 mm (1.8 x 1.6 x 0.8 in)
Accepted Input for L:
90 - 240VAC @ 50/60Hz
IN/OUT terminal isolation from L/N:
ZW132 (with metering): No.
ZW140 (without metering): Yes.
External Switch Voltage Requirements:
S1 and S2 inputs the voltage inputted between L and N terminals.
L and N inputted with 90 - 240VAC, then the external switch must also be powered by 90 - 240VAC to S1 or S2 connection.
L and N inputted with 24VDC, then the external switch must also be powered by 24VDC to S1 or S2 connection.
Environment of Installation:
Must be installed indoors
Should be located in a dry location
Should be installed in a fire resistant plastic gangbox.
Should not be installed in a metal gangbox for optimization of Z-Wave range.
0℃ to 40℃
32 ℉ to 104 ℉ .
Relative humidity: 8% to 80%.
Up to 492 feet outdoors.
Up to 150 metres outdoors.
Specifications subject to change without notice due to continuing product improvement.