This page lists the technical specifications for Door Window Sensor and form part of the larger Door Window Sensor user guide.


Name: Door Window Sensor
Model number:
POPE700892

Water proofing: IP20 rating

Z-Wave Plus Certified: Yes

S2 Security: Yes

Smart Start: Yes

Repeater: No

Beaming: No

Power supply: No

Battery charger input: No

Batterytype: 1 * 1/2 AA 

Battery life: 3 years assuming 5 open and 5 close events per day with Wakeup reports disabled.

Tilt Detection: must be over 5 degrees

Operating humidity: 

10 to 95%

Operating temperature: 

-20°C to 45°C

-4°F to 113°F.

Storage temperature:

-30°C to 70°C

-20°F to 158°F

Radio protocolZ-Wave Plus

Radio frequency

868.4 or 869.8 MHz EU

Operating distance:

Up to 30 meters outdoors

Up to 100 feet outdoors.

Dimension of Sensor:

  • Height - 19mm/0.75inches
  • Width - 71mm/2.8inches
  • Depth - 18mm/0.7inches

Dimension of Magnet 

  • Height-8mm/0.13inches
  • Width-20mm/0.78inches
  • Depth-11mm/0.43inches


Supported Command Classes

  • Sensor Binary (unsec+s2 Unauth)
  • Association Grp Info (unsec+s2 Unauth)
  • Device Reset Locally (unsec+s2 Unauth)
  • Central Scene (s2 Unauth)
  • Zwaveplus Info (unsec)
  • Supervision (unsec)
  • Configuration (unsec+s2 Unauth)
  • Alarm (unsec+s2 Unauth)
  • Manufacturer Specific (unsec+s2 Unauth)
  • Powerlevel (unsec+s2 Unauth)
  • Firmware Update Md (unsec+s2 Unauth)
  • Battery (unsec+s2 Unauth)
  • Wake Up (s2 Unauth)
  • Association (unsec+s2 Unauth)
  • Version (unsec+s2 Unauth)
  • Multi Channel Association (unsec+s2 Unauth)
  • Security 2
  • Transport Service (unsec)


Specifications subject to change without notice due to continuing product improvement.