This page lists the steps on utilizing Home Energy Meter Gen5 with Popp Hub ( and forms part of the larger Home Energy Meter Gen5 user guide.

Setup your Home Energy Meter Gen5 ZW095

1. Open the Login of your Popphub or http://YOUIPADRESS:8083

2. Add Your PoppHub ID/Username and Password and Login

3. Open the menu (top right) and select devices

4.   Press Add new (on the right side) by Z-Wave

5. Choose your Device or Press Add new Z-Wave Devices and identify it automatically

6 Following the Steps 

    1. Reset Device (Exclusion)

        Press the button on  the device once

    2. Inclusion Press the green Start button

        Press the button on the device once


7. After the inclusion, you can configure your device


The interview is not complete

It is possible that there are problems to get the interview complete with single variants.

The following steps explain how to solve this problem:

1. Open the Expert UI   http://YOURPOPPHUPIP:8083/expert

2. Choose Device and Status

3. Select your device

4. Press View Interview result

    You now see that the AssociationGroupInformation has not been retrieved.

    Sometimes even the meter is not complete


5. Please copy the following line into your browser line and adjust the marked values.


    a. Change IP-Adress (IP)

    b. Change Device ID (XXX)

    c. Change device Instance (YY)

    d. Check the command class

    e. Press Enter


CommandClass 89 = AssociationGroupInformation

CommandClass 50 = Meter


(clamp 1)[6].instances[1].commandClasses[89].data.interviewDone.value=true 

(clamp 2)[6].instances[2].commandClasses[89].data.interviewDone.value=true 

(clamp 3)[6].instances[3].commandClasses[89].data.interviewDone.value=true 

    f. It is confirmed by "true".

6. Repeat this for all missing instances.

7. The interview must be completed.