These instructions will allow you to use Aeotec Cam 360 with Homey Pro Hub. This will first require the installation of SmartThings app and Cam 360 before you can fully import the Cam 360 into Homey.


Make sure to setup your Cam 360 with your SmartThings account first which you can find steps here: Cam 360 User Guide


Token Setup in SmartThings


To obtain access, you need an API token from your SmartThings account, which must first be created.


  1. Open Create Token.
  2. Login with your SmartThings Login.
  3. Create a new token by clicking on "Create new token" (if you already have a token).
  4. Give the token the name Homey.
  5. Select all fields under Devices.
  6. Confirm your selection with "Create token".
  7. Make a note of the token you have created - if you lose it, you can always create a new token if you forgot to save it.


Install Homey App "SmartThings Community" 


  1. Open Homey.app in any web browser.
  2. Search for the "SmartThings Community" app and install it.
  3. Open Homey App or its web UI.
  4. Go to the app settings and search for "SmartThings Community" App
  5. Tap on Configuration.
  6. Enter the token in the field provided in the section (Token Setup in SmartThings).
  7. Confirm with Save changes.
  8. Switch to the tab Detected and tap on "Get Devices".
  9. Close the configuration when the devices have been retrieved.


Create new device


  1. Open your Homey App.
  2. Switch to Devices.
  3. Tap + and new device.
  4. Select the SmartThings Community app.
  5. Select SmartThings devices.
  6. Confirm with Connect.
  7. Select your Cam360 to be displayed in Homey.
  8. Confirm with Continue.