This page lists the technical specifications for Water Sensor 7 and forms part of the larger Water Sensor Pro user guide.
Name: Water Sensor 7 Pro
Model number:
US: ZWA019-A or ZWA019-A02
AU: ZWA019-B or ZWA019-B02
EU: ZWA019-C or ZWA019-C02
Sensors:
Water Sensor
Tamper
Temperature Sensor
Humidity
Product Weight: 42 g
Total Package Weight: 82g
Product Dimensions: 70 x 13 x 20 mm
Wire length:
Package Dimensions: 72 x 120 x 32 mm
UPC/EAN:
US: 810667025335
EU: 1220000016729
Technical Specifications:
Z-Wave Hardware: ZGM130S
Z-Wave Version: 7.12 or later
Smart Start: Yes
Repeater: No
Beaming Capable: No
Security Supported:
S2 Unauthenticated
S2 Authenticated
Operating distance:
More than 50 meters indoors / More than 164 feet indoors.
Up to 150 meters outdoors / Up to 492 feet outdoors.
Operating temperature: 32°F to 113°F / 0°C to 45°C.
Storage temperature: -22°F to 158°F / -30°C to +70°C
Relative humidity: 10% to 95%.
Humidity range: 0 to 80% RH +- 3%
Temperature range: -10 to 65°C (+- 1°C) / 14 to 149°F (+- 1.8°F)
Battery Lifetime: up to 3 Years
Battery type: Depends on the hardware version
Battery type:
Max Current Consumption: 5mW
Waterproof and dust rating: IP20 under IEC 60529
List of supported Command Classes
Association
Association Grp Info
Battery
Configuration
Device Reset Locally
Firmware Update Md
Indicator
Manufacturer Specific
Multi Channel Association
(Pro only) Sensor Multilevel
Notification
Powerlevel
Security 2
Supervision
Transport Service
Version
Wake Up
Zwaveplus Info