Z-Pi 7 (Z-Wave / ZWA025)
Aeotec Z-Pi 7 was developed to control actuators and sensors in a Z-Wave Plus Network as a self-powered Z-Wave® GPIO Adapter. It's powered by Se...
Mon, 3 Apr, 2023 at 10:41 PM
This page lists the technical specifications for Z-PI 7 and forms part of the larger Z-Pi 7 user guide. Name: Z-PI 7 Model Number: ZWA025 ZWA025-A: US...
Thu, 31 Oct, 2024 at 11:24 AM
It is possible to connect the Z-Pi 7 through a USB port using a Serial to USB adapter. Only 4 pins are required to connect and control the Z-Wave Chip on Z-...
Tue, 9 Nov, 2021 at 12:45 PM
This article describes the setup of the Z-Pi 7 in Home Assistant with a Raspberry Pi 3 or 4 with ZWaveJS to MQTT and forms part of the larger Z-Pi 7 user gu...
Tue, 3 Oct, 2023 at 10:46 AM
In order to update the Z-Pi 7, this actually uses the standard library for Z-Wave. The ZWaveJS team has included the update function to ZWaveJS UI (previous...
Thu, 7 Nov, 2024 at 10:58 AM
This guide will lead you through the full process of the firmware of the Z-Pi 7 to firmware version V7.18.8. NOTES: All commands will be in RED (excep...
Mon, 12 Feb, 2024 at 10:35 AM
It is possible to do so, but unfortunately the software controlling Z-Pi 7 must support the capability to backup the NVM (non-volatile memory). Currently th...
Mon, 17 Oct, 2022 at 12:16 PM
Aeotec declares that the European edition of Z-Pi 7, ZWA025-C, conforms with the relevant European Union harmonisation legislation. Further information on t...
Mon, 24 May, 2021 at 11:17 AM