Name: Nano Dimmer
Model number: ZW111
ZW111-A = US Frequency
ZW111-B = AU Frequency
ZW111-C = EU Frequency
Power input: 120 to 240VAC, 50/60Hz.
Rated Current Output: 1.2A maximum
Rated Power Output:
144W maximum (US)
276W maximum (EU/AU)
All Motor loads must be under 100W maximum for any region (3-wire power only).
External Switch max wiring length (between COM/S1 and COM/S2):
Minimum Power (Watt):
If your load is under the minimum requirement, you may need to install Nano Dimmer Bypass Load.
2-wire (no neutral)
Resistance load only: min 20W.
3-wire (with neutral)
Capacitive load: min 11W.
Inductive load: no min / max 100W
Resistance load: min 10W.
Max standby power: <0.8W.
Power measurement accuracy: + or - 3W.
Dimensions: 42.5 x 40 x 20 mm (1.6 x 1.5 x 0.7 in)
0℃ to 40℃
32℉ to 104℉.
Relative humidity: 8% to 80%.
Up to 492 feet outdoors.
Up to 150 metres outdoors.
Supported External Switches:
Toggle Switches (2-way, 3-way, 4-way)
Any standard Momentary Push Button (Cannot be used with LED powered momentary push buttons)
Supported load types
With dimming function (On/Off/Dim control)
Halogen bulbs with or without electronic transformer,
Dimmable LED bulbs (leading edge and trailing edge),Low Voltage VAC LED lighting,
Dimmable Fluorescent lamps.
Without dimming function (On/Off control only)
Compact fluorescent lamps with electronic rectifier,
Fluorescent tube lamps with electronic ballast,
Non-dimmable LED BulbsDirect Current LED Bulbs (VDC)
- Motor Loads under 100W (only while Nano Dimmer connected as a 3-wire device)