This page lists the technical specifications for Nano Shutter and form part of the larger Nano Shutter user guide.


Name: Nano Shutter

Model number: ZW141.

ZW141-A (US Frequency / 908.42MHz).

ZW141-B (AU Frequency / 921.42MHz).

ZW141-C (EU Frequency / 868.42MHz).

Power input: 120 to 240VAC, 50/60Hz.

Repeater: Yes

Beaming: Yes

AES 128 Security: Yes

S2 Framework: Yes

Power Input: 120 - 240VAC and 50/60Hz

Power Output:

Motor type: Single-phase AC asynchronous motor.

Max load rating: 100-240VAC, 50/60Hz, Max:2.5A.

Wiring Terminals: N, L, IN, OUT1, OUT2, S1, S2, Touch Panel

N – Power input for neutral.
L – Power input for live..
IN – Input for load power supply.
OUT1 – Output for Motor direction 1.
OUT2 – Output for Motor direction 2.
S1 – External switch 1 control for Motor.
S2 – External switch 2 control for Motor.

Max standby power: <0.8W. 

Dimensions: 42.5 x 40 x 20 mm (1.7 x 1.6 x 0.8 in)

Environment of Installation:

Must be installed indoors

Should be located in a dry location

Should be installed in a fire resistant plastic gangbox.

Should not be installed in a metal gangbox for optimization of Z-Wave range.

Operating temperature: 

0℃ to 40℃

32 ℉ to  104 ℉ .

Operating humidity: 8% to 80%.

Operating distance: 

Up to 492 feet outdoors.

Up to 150 metres outdoors.

Command Class Support:



Non-Secure Included
Secure Included
Node Info Frame
COMMAND_CLASS_ZWAVEPLUS_INFO V2
COMMAND_CLASS_ASSOCIATION V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO V1
COMMAND_CLASS_TRANSPORT_SERVICE_V2,
COMMAND_CLASS_CONFIGURATION V1
COMMAND_CLASS_SCENE_ACTUATOR_CONF,
COMMAND_CLASS_SCENE_ACTIVATION,
COMMAND_CLASS_SWITCH_BINARY,
COMMAND_CLASS_SWITCH_MULTILEVEL,
COMMAND_CLASS_VERSION V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC V2
COMMAND_CLASS_DEVICE_RESET_LOCALLY V1
COMMAND_CLASS_POWERLEVEL V1
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SECURITY_2
COMMAND_CLASS_SUPERVISION,
COMMAND_CLASS_FIRMWARE_UPDATE_MD
COMMAND_CLASS_MARK V1
COMMAND_CLASS_ZWAVEPLUS_INFO V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2,
COMMAND_CLASS_SUPERVISION,
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SECURITY_2
Security Command Supported Report Frame

COMMAND_CLASS_ASSOCIATION V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO V1
COMMAND_CLASS_CONFIGURATION V1
COMMAND_CLASS_SCENE_ACTUATOR_CONF,
COMMAND_CLASS_SCENE_ACTIVATION,
COMMAND_CLASS_SWITCH_BINARY,
COMMAND_CLASS_SWITCH_MULTILEVEL,
COMMAND_CLASS_FIRMWARE_UPDATE_MD V2
COMMAND_CLASS_POWERLEVEL V1
COMMAND_CLASS_VERSION V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC V2
COMMAND_CLASS_DEVICE_RESET_LOCALLY V1
COMMAND_CLASS_MARK V1


Specifications subject to change without notice due to continuing product improvement.