Before you can use Z-Stick 10 Pro, you'll need to at least begin the initial setup of your DIY software before you can connect Z-Stick 10 Pro. This won't be a guide, but more of a direction on where you can learn how to install Home Assistant. Each method of installing Home Assistant may be easier or harder depending on how you want to install it.
You can find the Home Assistant installation page here: https://www.home-assistant.io/installation/
1. Click on the links below to find the direct steps for installing Home Assistant one of these machines:
- Raspberry Pi (Easy)
- ODroid Devices (Hard)
- Any X86 or X64 Machine (Hard)
- Linux (Expert)
- MacOS (Expert)
- Windows (Expert)
Once you have your Home Assistant setup, you can now setup your Z-Stick 10 Pro to manage your Zigbee 3.0 and Z-Wave networks.
2. To set up Zigbee 3.0 and Z-Wave with Home Assistant, follow the guide links below:
Both Z-Wave and Zigbee 3.0 must be setup separately, once you finish one setup, move onto the next setup guide.