Aeotec Help Desk

Z-Stick 10 Pro was developed to control actuators and sensors in both Z-Wave Plus Series 800 as well as Zigbee 3.0 as a self-powered Home Automation USB A...

This page lists the technical specifications for Z-Stick 10 and forms part of the larger Z-Stick 10 user guide. Name: Z-Stick 10 Pro Model Number: ZWA0...

Before you can use Z-Stick 10 Pro, you'll need to at least begin the initial setup of your DIY software before you can connect Z-Stick 10 Pro. This won&...

This article will give you direct steps on how to run Home Assistant OS through VirtualBox on Windows, and how you can pass through the Z-Stick 10 Pro to in...

This article describes the setup of the Z-Stick 10 Pro in Home Assistant using ZWaveJS to MQTT; it forms part of the larger Z-Stick 10 Pro user guide. Setti...

This tutorial describes how to set up Z-Stick 10 Pro in Home Assistant and was created with: Home Assistant Core V2023.2.5.  Future versions may have sligh...

Zigbee2MQTT is a addon that can be installed instead of utilizing the base Zigbee integration in Home Assistant which is one possible option to using Zigbee...

This guide uses ZWaveJS UI to pair compatible Z-Wave Long Range devices using Z-Wave Long Range via the 40-digit DSK code and forms part of the larger Z-Sti...

Follow the steps below to update Z-Stick 10 Pro Zigbee to V7.4.3 using Teraterm and a Windows PC. This will allow your Z-Stick 10 Pro Zigbee coordinator to ...

In order to update the Z-Stick 10 Pro, this actually uses the standard library for Z-Wave. Downloading PC Controller 5 should give you all of the latest fir...