Aeotec Help Desk

illumino Switch has been crafted to power connected lighting using SmartStart, S2 framework, and Z-Wave Plus. It is powered by Aeotec’s S2 technology. ...

This page lists the technical specifications for illumino Wall Switch and forms part of the larger illumino Switch user guide. Name:  Sold as: illumino...

This page contains the firmware update files for illumino Switch and forms part of the larger illumino Switch user guide. Changelogs V1.5.3 Adds addi...

This guide will lead you on how to wire your illumino Switch to your existing gang-box and lighting as a single-pole switch for lighting control. This guide...

This guide will lead you how to wire your illumino Switch as a 3-way switch to your existing gang-box and lighting. This guide is a expansion of the illumin...

illumino Switch can be used to control other Z-Wave devices wirelessly without the need for a wire in between. It can be used wirelessly to control other Z-...

This guide is an additional guide to the illumino Switch user guide on how to connect illumino Switch to your AutoPilot which will display widget cards feat...

When paired with Aeotec Smart Home Hub and SmartThings software that the hub uses, illumino Switch user guide will offer the following features: On/off...

Connecting illumino Switch to Home Assistant requires a working installation of that software with Z-Wave management being handled by Aeotec's Z-Stick p...

If you were able to pair the illumino Switch but found that you are not able to control the output of the load with the switch with the manual buttons (but ...