Z-Stick Gen5 (ZW090)

Z-Stick Gen5 cycles Blue, Yellow, and Red while plugged in is Normal Operation.
This is the normal operation for the Z-Stick Gen5 to cycle between Blue, Yellow, and Red. If Z-Stick Gen5 is under heavy load or communication, the colo...
Mon, 18 Mar, 2019 at 12:28 PM
How to disable LED on Z-Stick Gen5.
This page provides instructions for disabling the LED of Z-Stick Gen5 using the Backup Software tool for Z-Stick Gen5 and form part of the larger Z-Stick Ge...
Wed, 24 May, 2017 at 6:39 PM
Pair Z-Stick Gen5 as secondary using Domoticz software.
For this article, this will help you pair Z-Stick Gen5 as a secondary controller to another Z-Wave gateway, this is only one of many methods that can be use...
Mon, 17 Jan, 2022 at 12:41 AM
My Z-Stick Gen5 cannot be put into Inclusion Mode (Primary Controller)
If by some reason that your Z-Stick Gen5 cannot include any device via push button method or through software, please follow the instructions below: 1) ...
Wed, 9 Oct, 2019 at 1:10 PM
Z-Stick Gen5 and security (S0 and S2 Framework)
Z-Stick Gen5 ZW090 is a highly versatile and portable device used as an interface for a third party software to be used and connected with Z-Stick Gen5. For...
Sat, 23 May, 2020 at 12:36 AM
Check Product firmware using Zensys Tool
If you are unable to check the firmware version of your Z-Wave devices using your current firmware, there is an optional method to use Zensys Tool to help y...
Mon, 9 Sep, 2019 at 3:19 PM
Configuring Parameter Settings with Zensys Tool
First, you will need to download the Zensys tool which can be found here: https://aeotec.freshdesk.com/helpdesk/attachments/6091420613, in most cases you ...
Mon, 9 Sep, 2019 at 3:20 PM
Remove a Failed Node using Zensys Tool / PC Controller 4
You can easily remove a failed node using the Zensys Tool which can be found here to download it: https://aeotec.freshdesk.com/helpdesk/attachments/60914206...
Thu, 4 Nov, 2021 at 2:23 PM
Adding Z-Stick as a Secondary Controller to another gateway with Zensys Tool
This page shows you how to make Z-Stick Gen5 a secondary controller to another gateway using Zensys Tool and a Vera Edge gateway and form part of the larger...
Wed, 6 Nov, 2019 at 5:37 PM
Perform a Controller Shift to Change Primary Roles using 2 Z-Sticks.
To do a network shift between controllers, you will need to start off by including the Z-Stick Gen5 into the Z-Stick S2 network. First download the Zen...
Mon, 21 Dec, 2020 at 5:31 PM